Remko WPM-Smart-Control-Manual for specialists-WKF-085 Uživatelský manuál stáhnout pdf (Strana 27)

Reheating

Desired charging temperature for the hot water

storage tank.

Set temperature to which conventional reheating

should heat the storage tank to ensure comfort. If

there is a solar yield, the storage tank can become

substantially warmer. The maximum temperature

for solar charging can be modified under Settings/

Solar/Storage tank.

For efficiency reasons, the lowest possible set tem-

perature should be selected. If the available quan-

tity of hot water is insufficient, the value should be

increased. Pay attention to the maximum tempera-

ture of the heat generator while doing so.

Select the storage tank set temperature with the

rotary knob and confirm with "OK".

Fig. 40: Reheating

Menu item Parameter Factory setting

Storage tank

set temp.

40°C - 65°C

Factory recom-

mendation

45°C

Press "Next".

Hot water circulation

If there is a hot water circulation pump in the

building, which you are intending to operate in an

energy-saving manner using the controller, this

function must be activated (select with the rotary

knob and confirm with "OK").

Fig. 41: Hot water circulation

Menu item Parameter Factory setting

Hot water

circulation

Deactivated

As required

Activated

Press "Next".

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 83 84

Žádné komentáře

Remko WPM-Smart-Control-Manual for specialists-WKF-085 Uživatelský manuál Strana 27